Glove Box Wood
-
- Posts: 38
- Joined: Sat Dec 30, 2017 11:28 am
- Location: Gig Harbor, WA USA
- Contact:
Glove Box Wood
Hello
Can someone possibly refer me to a company that sells replacement glove box wood trim and door? I have the glove box liner but the door and wood surrounding is trashed and I don't think it's original anyway. Preferably company in U.S. I have checked with Madera in California but they only restore existing pieces. XKs Unlimited only sells the liner. Any help would (no pun intended) be appreciated. An alternative would be plans or drawings to fashion one from scratch.
Can someone possibly refer me to a company that sells replacement glove box wood trim and door? I have the glove box liner but the door and wood surrounding is trashed and I don't think it's original anyway. Preferably company in U.S. I have checked with Madera in California but they only restore existing pieces. XKs Unlimited only sells the liner. Any help would (no pun intended) be appreciated. An alternative would be plans or drawings to fashion one from scratch.
Mark Underwood
Gig Harbor, WA
USA
1965 3.8s
1997 XJR
1930 Ford model A
1954 Chevy Sedan Delivery
Gig Harbor, WA
USA
1965 3.8s
1997 XJR
1930 Ford model A
1954 Chevy Sedan Delivery
- Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Glove Box Wood
They come up on Ebay from time to time.
Try Saul at British Autowood. He is really a restorer but might have access to some old bits.
http://www.britishautowood.com/
Try Saul at British Autowood. He is really a restorer but might have access to some old bits.
http://www.britishautowood.com/
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Re: Glove Box Wood
I have spares of all the wood apart from the dash top but they are all for right hand drive cars so no good for you. Jose who is/was a moderator on the forum has a lot of spares but not sure if he has wood dash parts. He is in Florida and Tennessee USA so will have LHD parts.
Rob.C. P1B8973BW
1968 S Type 3.4 Auto. Old English White.
1993 Yamaha FJ1200 Yellow
1966 Ford Anglia 1760 cross flow (still being built)
2012 Old English sheep dog. Grey and white.
http://torbayweddingcarclub.co.uk/?page_id=57
1968 S Type 3.4 Auto. Old English White.
1993 Yamaha FJ1200 Yellow
1966 Ford Anglia 1760 cross flow (still being built)
2012 Old English sheep dog. Grey and white.
http://torbayweddingcarclub.co.uk/?page_id=57
- David Reilly
- Posts: 184
- Joined: Fri Oct 27, 2017 8:02 pm
- Location: Wagener, SC USA
- Contact:
Re: Glove Box Wood
In searching for an intake hose bracket, which I still nave not found, I talked to Jagnut Jaguar Spares, Jack White, (540) 743-4037 in the USA, He has a complete dash with glove box recently refinished. Can't remember exactly what he is asking, but it sounded very reasonable.
- Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Glove Box Wood
BTW ~ British Autowood is also in Florida.
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Re: Glove Box Wood
(deleted)
Last edited by jaguar&mg on Mon May 08, 2023 10:52 am, edited 1 time in total.
1964 Jaguar S type 3.8 Man OD
1966 Jaguar S type 3.8 Man OD PAS
1967 MGB
1986 Jaguar XJ6 4.2 (series 3)
1966 Jaguar S type 3.8 Man OD PAS
1967 MGB
1986 Jaguar XJ6 4.2 (series 3)
- John Quilter
- Posts: 286
- Joined: Tue Oct 29, 2019 8:53 pm
- Location: Eugene, Oregon USA
- Contact:
Re: Glove Box Wood
In looking for the glove box door and surround used, I would contact Jaguar Heaven in Stockton California. They have a massive recycling yard of only Jaguars and I think Land Rover/Range Rovers. But with used parts you will likely have to refinish it and stain it to match what is in the car now.
1965 3.8S MOD, 1990 XJ6, 1960 Morris Minors X2, 1951 MGTD, 1969 Austin America
- Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Glove Box Wood
And remember that a good artist can paint in grain to improve match. British Autowood in Florida does it all the time and you would not know it had been touched.
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Last 100 Members Who Visited This Topic. Total 48 visits
deelcee (1),
member (1),
NigelW (1),
Orlando St.R (3),
HG_S-type (1),
Rogerisleofman (1),
John Quilter (6),
Treetrimmer (5),
cass3958 (7),
minimeadow (1),
Glyn Ruck (3),
jaguar&mg (5),
Tom Hoffman (4),
Corbs (1),
Horse Power Junkie (1),
Albion (1),
David Reilly (3),
Markunderwood (2),
Norton (1)
Who is online
Users browsing this forum: No registered users and 2 guests