Stories and photo's about "S"-Types you know or own
Glyn Ruck
Posts: 1619 Joined: Sun Oct 07, 2018 2:14 pmLocation: Llandudno, Cape Town, South Africa
Contact:
Post
by Glyn Ruck Mon Dec 03, 2018 5:42 pm
Moving along nicely.
I presume your engine mounting brackets look like this? A big weakness ~ I had 6 like this. Robey's found me an uncracked used set that we strengthened before fitting.
P1160628.JPG (67.3 KiB) Viewed 2626 times
P1160629.JPG (67.85 KiB) Viewed 2626 times
P1160639 (2).JPG (109.62 KiB) Viewed 2626 times
NigelW
Posts: 517 Joined: Fri Oct 20, 2017 9:14 pmLocation: East Hertfordshire
Contact:
Post
by NigelW Mon Dec 03, 2018 7:15 pm
Never mind Ital's, I went on a Jaguar factory visit in the early 80's and saw the same method of getting doors to fit with planks of 4x2 on the XJ Series 3 production line. When we questioned the guys on the line about this they said the "official" term for the process was "door f**king"!
1964 Jaguar 3.8 S Type 1B50442BW (since 1976)
DevilDog
Posts: 388 Joined: Mon Oct 30, 2017 1:53 pmLocation: Hollister, MO
Contact:
Post
by DevilDog Tue Dec 04, 2018 2:28 pm
Joe
Glyn Ruck
Posts: 1619 Joined: Sun Oct 07, 2018 2:14 pmLocation: Llandudno, Cape Town, South Africa
Contact:
Post
by Glyn Ruck Tue Dec 04, 2018 3:04 pm
Ouch! ~ that's a pity. Won't be long & all will look like this. I also had to go the firing route with my project.
IMG_0997.JPG (3.47 MiB) Viewed 2609 times
IMG_1009.JPG (3.07 MiB) Viewed 2609 times
DevilDog
Posts: 388 Joined: Mon Oct 30, 2017 1:53 pmLocation: Hollister, MO
Contact:
Post
by DevilDog Tue Dec 11, 2018 11:19 pm
Joe
Glyn Ruck
Posts: 1619 Joined: Sun Oct 07, 2018 2:14 pmLocation: Llandudno, Cape Town, South Africa
Contact:
Post
by Glyn Ruck Wed Dec 12, 2018 3:56 pm
That is going to be one handsome motor car. You are achieving very good panel fit. Fortunately the dies at Pressed Steel were still in good condition in 1965.
DevilDog
Posts: 388 Joined: Mon Oct 30, 2017 1:53 pmLocation: Hollister, MO
Contact:
Post
by DevilDog Wed Dec 12, 2018 10:55 pm
Thanks Glyn.......
Joe
cass3958
Posts: 1561 Joined: Sat Oct 21, 2017 3:37 pmLocation: Torquay Devon UK
Contact:
Post
by cass3958 Thu Dec 13, 2018 9:24 pm
Very nice Joe. Slowly coming back to life. What do you reckon finished for Christmas or you going to wait until the New Year?
Rob.C. P1B8973BW
1968 S Type 3.4 Auto. Old English White.
1993 Yamaha FJ1200 Yellow
1966 Ford Anglia 1760 cross flow (still being built)
2012 Old English sheep dog. Grey and white.
http://torbayweddingcarclub.co.uk/?page_id=57
DevilDog
Posts: 388 Joined: Mon Oct 30, 2017 1:53 pmLocation: Hollister, MO
Contact:
Post
by DevilDog Thu Dec 13, 2018 9:40 pm
What year.....LOL.
Joe
DevilDog
Posts: 388 Joined: Mon Oct 30, 2017 1:53 pmLocation: Hollister, MO
Contact:
Post
by DevilDog Sat Jan 12, 2019 9:50 pm
Attachments
0112191152.jpg (2.59 MiB) Viewed 2508 times
Joe
Last 100 Members Who Visited This Topic. Total 2134 visits
KeithD jaguar&mg Glyn Ruck deelcee Robbo911 Tom Hoffman Harv63 Fredomusicman RollyTG philippe HG_S-type abbirkin John Quilter Albion Treetrimmer cass3958 Bingo Orlando St.R NigelW jerry_hoback jonesdl David Reilly DevilDog Mechiel Norton MDLV SCDaveD roman_mg Jim_R Markunderwood paddyx350 johngosnell wouldbeowner Sam01 NWG JCS YoungJagFan pjrjag Jose KennyL maurizio ortodossi oldirish33 vaultsman muzza49 Horse Power Junkie
Users browsing this forum: No registered users and 0 guests
KeithD (2), 
jaguar&mg (3), 
Tom Hoffman (44), 
John Quilter (70), 
cass3958 (267), 
Orlando St.R (120), 
NigelW (40), 
David Reilly (18), 
roman_mg (1),