Page 1 of 1
Sun Visors
Posted: Sun Aug 18, 2019 2:46 pm
by johngosnell
Some of you may remember that I had asked about the chrome edging that were fitted to the Jag MK2 cars, anyway thanks to our friends on eBay I have acquired and fitted a couple to my visors. I know that they are Not original but they just finish off the visor. See attached Pics
- DSC00268.JPG (7.08 MiB) Viewed 2076 times
- DSC00269.JPG (6.35 MiB) Viewed 2076 times
Regards John
1B1257BW
Re: Sun Visors
Posted: Mon Aug 19, 2019 9:29 am
by Orlando St.R
They look nice, John.
Re: Sun Visors
Posted: Mon Aug 19, 2019 4:18 pm
by cass3958
John the look a lot deeper than mine which are 14 cm or about 5.5 inches deep. What depth are yours?
Re: Sun Visors
Posted: Tue Aug 20, 2019 8:14 am
by johngosnell
Although I had to make them myself they should be close to the original. There was no frame but the cover was in place so I had to make a body to stiffen up the visor and the shape of the visor was taken from the original covers, but I will go and measure and come with the dimensions.
Edit, Just measured visors and they are 6"inches deep at the widest which is the same as an old pair of visors that I have but they are from the MK2
John
1B1257BW
Re: Sun Visors
Posted: Tue Aug 20, 2019 1:31 pm
by cass3958
Not too far apart then it is possibly the angle the photo has been taken which makes them look deeper. I looked at them and thought at 6'2 tall I would only be able to see the top of the bonnet and not the road.lol.
Re: Sun Visors
Posted: Tue Aug 20, 2019 2:00 pm
by Glyn Ruck
Old S Type sun visor frames before clean up, re-plating & re-covering with Union Cloth.
- image1 (3).JPG (370.17 KiB) Viewed 2037 times