Page 2 of 2
Re: The S type tire changing Jack
Posted: Tue Feb 26, 2019 9:48 pm
by Jose
Cass I'll send you a pair, I owe you for that dipstick bracket you sent me.
Re: The S type tire changing Jack
Posted: Tue Feb 26, 2019 10:05 pm
by cass3958
Very kind of you Jose.
Re: The S type tire changing Jack
Posted: Thu Feb 28, 2019 2:27 pm
by Jose
mailed this morning.
Re: The S type tire changing Jack
Posted: Thu Feb 28, 2019 6:38 pm
by cass3958
Jose wrote: ↑Thu Feb 28, 2019 2:27 pmmailed this morning.
Ta!
Re: The S type tire changing Jack
Posted: Tue Apr 28, 2020 11:48 am
by johngosnell
Ok I thought I had bought an S type Car jack (as advertised plus420 & 420G) but I cant get it to fit the space, the floor cover fowls the top of the jack it looks identical to the jack that was serviced by Jose the only difference being the top domed cover does not have any screws to remove the cover.
If the jack is facing with the jacking arm up it hits the handle in the middle of the floor closure cover, if it is turned with the jack arm down the crank handle hits the cover. It is identical to the unit being shown on this web site on page 4
http://www.classic-british-car-jacks.uk ... _jacks.htm
Dimensions are the same as on the web page.
Regards John
1B12557BW
Re: The S type tire changing Jack
Posted: Tue Apr 28, 2020 1:38 pm
by Glyn Ruck
Re: The S type tire changing Jack
Posted: Tue Apr 28, 2020 4:37 pm
by cass3958
Here is mine in position in the boot of the car. I have the handle sticking out to the side where the handle of my Thor hammer is.
If I was really anal I should take this out and give it a good clean or possibly a repaint.lol.