Front valance under bumper

Body & metalwork restoration, Exterior trim, Bumpers, Doors, Glazing & Seals. Interior (inc. Instruments & Switches) & Luggage spaces
User avatar
Glyn Ruck
Posts: 1619
Joined: Sun Oct 07, 2018 2:14 pm
Location: Llandudno, Cape Town, South Africa
Contact:

Re: Front valance under bumper

Post by Glyn Ruck »

Orlando St.R wrote: Tue Nov 13, 2018 6:12 pm That looks very smart, Glyn. But I'm worried by the unauthentic lack of oil on the underside of your car. Are you sure it hasn't run out? :lol:

LOL! :D Definitely! I was so determined to have a Jag that did not do an impersonation of the Torrey Canyon. Last minor leak detected was at the new speedo angle drive so out came the drive capsule for a new O Ring. My efforts are likely futile. Next leak I will leave on the basis that all Jags must have at least one leak & hopefully others will not follow. Think I must buy a drip pan for the garage floor that thusfar is clean.:lol:

BTW ~ at least not having a BW transmission helps a little.
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
User avatar
Orlando St.R
Global Moderator
Posts: 496
Joined: Sun Jul 29, 2018 11:42 am
Location: Rutland, UK
Contact:

Re: Front valance under bumper

Post by Orlando St.R »

I'm sure that my Borg Warner leaks are the reason my car is still with us! I have two large drip trays on my garage floor.
1965 Jaguar 3.8S RHD DG Auto, Opalescent Maroon/Beige Leather, Varamatic PAS - one-family-owned from new
Jose
Global Moderator
Posts: 590
Joined: Wed Oct 25, 2017 12:13 pm
Contact:

Re: Front valance under bumper

Post by Jose »

1965 was the year that most S type were built, curiously most of which were built in 1964 to be sold as 1965 models.

my 1984 XJ-6 was built in June 1983. First sold and registered in September 1984. Original price was $54 thousand dollars US. Pretty hefty price considering that today these supercars are worth so little.
User avatar
Glyn Ruck
Posts: 1619
Joined: Sun Oct 07, 2018 2:14 pm
Location: Llandudno, Cape Town, South Africa
Contact:

Re: Front valance under bumper

Post by Glyn Ruck »

My engine block was only cast in 1965 so my car had to be built after that. No 3 or 4 off the line at CDA. Blocks were cast in the UK & machined in SA.


IMG_0979.JPG
IMG_0979.JPG (3.16 MiB) Viewed 1922 times
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
User avatar
Glyn Ruck
Posts: 1619
Joined: Sun Oct 07, 2018 2:14 pm
Location: Llandudno, Cape Town, South Africa
Contact:

Re: Front valance under bumper

Post by Glyn Ruck »

Orlando St.R wrote: Wed Nov 14, 2018 4:19 pm I'm sure that my Borg Warner leaks are the reason my car is still with us! I have two large drip trays on my garage floor.
Yeah ~ with UK climatic conditions some oil protecting the bodywork is no bad thing. I remember the days that UK car owners pumped Waxoil into every body cavity regularly. I've done sills, doors, bonnet, bootlid, under trim etc. on my car with Tectyl.
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Post Reply

Last 100 Members Who Visited This Topic. Total 100 visits

Treetrimmer (1), KeithD (1), paddyx350 (1), User avatar NigelW (6), User avatar primaz (1), Albion (1), jonesdl (5), Jose (22), User avatar Orlando St.R (21), User avatar cass3958 (9), User avatar Glyn Ruck (29), Markunderwood (1), muzza49 (1), vaultsman (1)

Who is online

Users browsing this forum: No registered users and 0 guests