Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

DevilDog · Post by **DevilDog** » Fri Jan 25, 2019 6:51 pm

Great comments and photos....thanks.
Now comes the brake and fuel lines.

Jose · Post by **Jose** » Mon Feb 11, 2019 11:39 am

NOTE:

Mark Underwood's question and replies moved to its own topic at Suspension, Steering & Brakes / Radius arm bushings removal

Jose
Moderator

DevilDog · Post by **DevilDog** » Sun May 12, 2019 1:06 pm

Getting the dash ready.

: 0507190853.jpg (2.74 MiB) Viewed 2470 times

: 0507190853a.jpg (2.67 MiB) Viewed 2470 times

: 0507190853b.jpg (2.71 MiB) Viewed 2470 times

: 0507190854.jpg (2.78 MiB) Viewed 2470 times

: 0507190854a.jpg (2.5 MiB) Viewed 2470 times

: 0507190854b.jpg (2.5 MiB) Viewed 2470 times

: 0507190855.jpg (2.39 MiB) Viewed 2470 times

Albion · Post by **Albion** » Tue May 14, 2019 8:27 am

Great work, well done! I look forward to when I start seeing such results on mine. Noticing the brackets used to mount the wood in place brings to mind that the ones holding the center switch board with the swivel bolts are mounted to the dash by two bolts on either side fixed in place. I noticed that they do not have round holes for the bolts, but square holes. Should there be any bush or anything?

DevilDog · Post by **DevilDog** » Wed May 15, 2019 1:38 pm

Albion wrote: ↑Tue May 14, 2019 8:27 am Great work, well done! I look forward to when I start seeing such results on mine. Noticing the brackets used to mount the wood in place brings to mind that the ones holding the center switch board with the swivel bolts are mounted to the dash by two bolts on either side fixed in place. I noticed that they do not have round holes for the bolts, but square holes. Should there be any bush or anything?

Could you post a photo of the specific part you are referring to? I looked at my center console and do not see square holes anywhere.

Albion · Post by **Albion** » Thu May 16, 2019 4:12 pm

DevilDog wrote: ↑Wed May 15, 2019 1:38 pm
Albion wrote: ↑Tue May 14, 2019 8:27 am

Could you post a photo of the specific part you are referring to? I looked at my center console and do not see square holes anywhere.
It is the bracket holding the switch board.

Orlando St.R · Post by **Orlando St.R** » Thu May 16, 2019 8:19 pm

Albion wrote: ↑Tue May 14, 2019 8:27 am Should there be any bush or anything?

By the look of it, no. Just a plain washer and a nut.

: WP_20170312_17_01_17_Pro_small.jpg (215.6 KiB) Viewed 2415 times

: WP_20170312_17_01_17_Pro_crop.jpg (184.24 KiB) Viewed 2415 times

Albion · Post by **Albion** » Thu May 16, 2019 8:55 pm

Thanks.

DevilDog · Post by **DevilDog** » Tue May 21, 2019 2:48 pm

Concur....washer and nut.

DevilDog · Post by **DevilDog** » Wed May 22, 2019 2:18 pm

Getting the frames and window installed.....B pillar not attached.

: 0521191930_Burst01.jpg (2.13 MiB) Viewed 2389 times

: 0521191931b.jpg (2.47 MiB) Viewed 2389 times

: 0521191932.jpg (2.29 MiB) Viewed 2389 times

: 0521191932a.jpg (2.34 MiB) Viewed 2389 times

THE INTERNATIONAL JAGUAR 'S'-TYPE REGISTER FORUM

Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Re: Miss Kitty - 1965 Jaguar S-Type 3.8 RHD

Last 100 Members Who Visited This Topic. Total 2134 visits

Who is online