Yes you need 4 Joe. One for each door's winding window. (to fit in each doors external chrome waist trim 32,33,35,36.)
You will also need 4 internal "Whisker" strips (Door Glass Waist Seal internal for S Type) that are held to the inside of the chrome window frames by clips & the winding windows buff against on the horizontal inside of the door.
I bought 4 X BD20010/1 and cut to length because they are not finished length anyway.
or you can buy 2 X BD20010/1 & 2 X BD20010/2 ~ same stuff just different lengths.
Body Fittings
- Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Body Fittings
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Re: Body Fittings
Got it....that part was included in their rubber kit which I have.
Thanks so much....you are a wealth of knowledge.
Thanks so much....you are a wealth of knowledge.
Joe
Captain, USMC (Retired)
1965 Jaguar 3.8 Manual w/OD & RHD "Miss Kitty" 1B54554DN
2003 Dodge Durango SLT
2001 Dodge V10 2500
2017 Load N Go 24' car hauler
Captain, USMC (Retired)
1965 Jaguar 3.8 Manual w/OD & RHD "Miss Kitty" 1B54554DN
2003 Dodge Durango SLT
2001 Dodge V10 2500
2017 Load N Go 24' car hauler
- Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Body Fittings
Interesting! It's one thing I've never seen in a rubber kit. No rubber in the part.
Regards help/guidance it's matter of kindred spirits with the same goal in mind. I'm just doing the finishing bits on my restoration & you are well on your way to completion. I'm probably as enthusiastic as you are about seeing your car come together. I really enjoy watching your progress & will help in any way my old brain permits. I've battled my way though sourcing bits from the southern tip of Africa to do things properly & accurately. It can be a challenge. Bumped my head a number of times. Your woodwork is stunning BTW.
Regards help/guidance it's matter of kindred spirits with the same goal in mind. I'm just doing the finishing bits on my restoration & you are well on your way to completion. I'm probably as enthusiastic as you are about seeing your car come together. I really enjoy watching your progress & will help in any way my old brain permits. I've battled my way though sourcing bits from the southern tip of Africa to do things properly & accurately. It can be a challenge. Bumped my head a number of times. Your woodwork is stunning BTW.
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
Re: Body Fittings
Thanks so much.....slowing down now. Three litters of French Bulldogs over the past two days. We will be very busy. For me, Miss Kitty will be on hold until the end of March.
Joe
Captain, USMC (Retired)
1965 Jaguar 3.8 Manual w/OD & RHD "Miss Kitty" 1B54554DN
2003 Dodge Durango SLT
2001 Dodge V10 2500
2017 Load N Go 24' car hauler
Captain, USMC (Retired)
1965 Jaguar 3.8 Manual w/OD & RHD "Miss Kitty" 1B54554DN
2003 Dodge Durango SLT
2001 Dodge V10 2500
2017 Load N Go 24' car hauler
Last 100 Members Who Visited This Topic. Total 210 visits
Glyn Ruck (116), DevilDog (52), RollyTG (5), Sam01 (1), Orlando St.R (5), Albion (9), awiedie (1), Tom Hoffman (4), cass3958 (9), Jose (3), HG_S-type (2), jonesdl (2), David Reilly (1)
Who is online
Users browsing this forum: No registered users and 0 guests