Comes with a 24 month Warranty but I would imagine that is just out of date now.
There is still a company called Koolair in Florida. I wonder if it the same people?
Search found 1555 matches
- Tue May 21, 2024 4:48 pm
- Forum: "S"-Type Parts For Sale
- Topic: Rear deck "KoolAire" A/C unit
- Replies: 4
- Views: 39
- Tue May 21, 2024 7:25 am
- Forum: Engine & Drive Train
- Topic: Numbers matching...well.. ALMOST...
- Replies: 1
- Views: 36
Re: Numbers matching...well.. ALMOST...
The S Type engine was certainly prefixed with 7B. The engine number is often on early cars stamped twice on the engine. On the head behind the front valley but heads can be changed and the second place is on the side of the block above the oil filter housing. (see photo). My 1967 does not have the e...
- Thu Apr 25, 2024 4:47 pm
- Forum: Body & Interior
- Topic: retractable belts for front seats
- Replies: 5
- Views: 373
Re: retractable belts for front seats
Good spot with the thicker material used in the last photos. This was because when I had made the plates which was difficult because the thickness of the steel and trying to bend it in a vice, I found the flat section that the inertia reel was to sit on was too wide, wider than the sill it was sat o...
- Wed Apr 24, 2024 2:08 pm
- Forum: Miscellaneous
- Topic: Vibration
- Replies: 5
- Views: 360
Re: Vibration
Difficult to suggest anything without a lot more information but as Norman has said if the prop shaft has been removed I would start there. When removing a prop shaft I always mark the orientation between the shaft and the diff so it goes back the way it came out, same at the gearbox end. Make sure ...
- Tue Apr 23, 2024 8:42 am
- Forum: Body & Interior
- Topic: retractable belts for front seats
- Replies: 5
- Views: 373
Re: retractable belts for front seats
Just remember that the bottom of the "B" pillar is not designed or strong enough by itself to hold the seat belt. The eye bolt on the floor is the main point of security and the bolt I fitted at the top of the bracket which goes into the bottom of the "B" pillar is just to hold t...
- Mon Apr 22, 2024 8:39 am
- Forum: Body & Interior
- Topic: retractable belts for front seats
- Replies: 5
- Views: 373
Re: retractable belts for front seats
We have covered this before but I cannot find the thread in the search box. When I first fitted my inertia reels in the front I noted there was not enough room for the inertia reel block to sit between the side of the seat and the "B" pillar so I mounted it on the floor just behind the sea...
- Thu Apr 11, 2024 7:03 am
- Forum: Your "S"-Type
- Topic: First show
- Replies: 3
- Views: 423
Re: First show
Nice result. You must be very proud of Big Blue.
- Fri Apr 05, 2024 4:29 pm
- Forum: General Discussion
- Topic: Almost a unique collision
- Replies: 3
- Views: 124
Re: Almost a unique collision
I drive my car with awareness and always leave a large gap between my self the the car in front. Problem is other drivers take this as an invitation to pull out of a side road and jump into this gap. Now my S Type has good brakes but I also drive my friends 1953 Alvis TA21 which does not have the be...
- Fri Mar 22, 2024 11:03 pm
- Forum: Suspension, Steering & Brakes
- Topic: Inboard Rear Calipers
- Replies: 4
- Views: 627
Re: Inboard Rear Calipers
Is there any difference between a series one and any other XJ6 set up. Do the XJS callipers fit and can you fit vented discs with the series one or do they have to remain standard.
- Mon Mar 18, 2024 5:18 pm
- Forum: Suspension, Steering & Brakes
- Topic: Marles varamatic steering box
- Replies: 43
- Views: 6053
Re: Marles varamatic steering box
My car being a 1967 has the BW35 gearbox also has an oil cooler for that which is in the base of the radiator. Seems a bit of an over kill but as you say possibly for hotter climates than ours.