THE INTERNATIONAL JAGUAR 'S'-TYPE REGISTER FORUM

Joe the bolts you can see are the bottom of the radiator support bolts. Nothing to do with the stabilizers as I do not have them.

Rob,
Perfect....no need to clean off the paint as the stud goes through the body and then the sandwich mount is bolted. I can clearly see the offset in my second picture and I follow it. Thanks....

Oh, by the way, in your first picture of the sandwich mount, what is the single bolt, washer, and rubber coming through body? I see another one on the other side of the car. Are those the stabilizing links from the engine mounts?

Joe here is a picture of the sandwich plate mount fixed to my car but as I said before in your previous post if you have not put the rear V mount around the correct way this front sandwich plate mount will not line up correctly. I have also included a picture of the V mount on my car but you cannot see the offset. The offset on the V mount is very slight and puts the front sandwich plate mount out by only a 1/4 of an inch but it means you cannot do up the bolts as the sandwich plate mount does not sit against the chassis leg correctly.

Does anyone have a photo on how this part is mounted to the front suspension and the car body? Here is a photo of the part and where it mounts on the front suspension crossmember (see the annotation of the part).